Today I started fitting the backseat to see what modifications would be needed to fit the min-tubs. Both inter wheel wells have been moved inboard about 2 ½” each. After the 1st test fit I was pleasantly surprised to find very little modifications would be required, and most importantly the stock seat cover could be used!









The seat needed no modification as the seat frame cleared the wheel well.









The two tabs at the bottom of each wheel well needed to be moved to their original location. The tabs hold the seat back down.









These two metal rods need to be moved in about 1 ½” on each side to clear the wheel well.





Here you can see the 2 rods moved and the original rod to show the difference.





Fits great just need new black seat covers.
Thanks
Pat