After a few failed attempts we finally came up with the correct formula to make the bumper guard crossmember. We were having problems with the carbon fiber bunching up on top of the mold when in the vacuum bag. The carbon fiber on the mold side look excellent so we decided to hand lay a final layer of carbon fiber on the top side after it was removed from the mold. I'm not sure if I'm going to go with the carbon fiber look or if I'm going to end up painting it black so it would be undetectable. The steel crossmember is about 6 pounds and I ended up with the carbon fiber weighing in at 1 lb. 4 oz.
Thanks
Pat