I made some good progress on the K-member assembly this week. I had the K-member and swaybar brackets powder coated an 80% gloss. The powder coater was only supposed to blast the swaybar so I could darken it and leave it gray. He ended up powder coating it by mistake.
I put a pitman arm seal kit in the steering box and painted it with Eastwoods Extreme Chassis Black. It has a little less gloss then the K-member which I believe is correct. The rest of the suspension componants are bare metal.(except for the LCA) The dust shields are supposed to be galvanised but I bead blasted them years ago thinking they were supposed to be black. I stripped off the black paint I had put on them and lightly wire wheeled them. I still have to redo the end links and find some new pins for the strut rods but basically the K is done.