Over the last week I installed the brake and fuel lines. I also installed the fuel tank yesterday. The lines are stainless and are from Fine Lines. They fit fairly well but needed some tweeking here and there. The tanks straps and J-bolts needed to be modified a little bit to fit in their mounts. Before the tank went in I bolted the shocks to their upper mounts and installed the passengers side over axle pipe hanger.

The exhaust hanger(Accurate) isn't 100% stock looking but it's close enough for me. The differences don't affect the function of the hanger. You can see that the original part used bolts to clamp onto the pipe where the new part uses carriage bolts and nuts. The lower strap is also different.


I preinstalled the vapor separator onto the new tank and made a new tank pad.


fuel tank and vapor separator installed


Once the fuel line connection was hooked up I installed the new muffler heat sheilds from Dales Cuda shop.