that ought to move that 4,000+ lb pig pretty well!!
long driveshaft...sounds like a club cab. the custom shaft I had made for my old truck with the big block and TKO was 73.5" long.
dang truck weighed 4200 lbs with me in the seat!
this little blue truck is only about 300 lbs lighter.
I know what you mean about "all the same" seems everyone has the same cold air intake, same valve covers, etc. which is why I went old school with my engine theme. it's just a stock rebuilt 5.9L with a hughes whiplash cam, .544 lift, 222 duration @ .050 107LSA. heads shaved .030 and a .039 felpro head gasket. thinking I'm at about 9.5:1 compression now. maybe as high as 9.7:1 all depends on how big the stock chambers were before I cut them .030!! I've heard they were 59-63 CCs, then someone else told me they actually CCd their heads after a .040 cut and a valve job (sank the valves a bit) and his were 63CCs
