So the hole I did moved the rotor forward that's for sure, but I think I did it a little to far forward, So with one of the reluctors I bought I'm going to do a new hole a little closer to the original hole and try it again. It sounds smother while idling, but I brought it up to around 2500 rpm and it was still Miss firing but it wasn't as severe as it was before relocating the reluctor. So I think I'm a little too far forwards I think I moved the rotor forward about half which would be 22.5 degrees and I think the sweet spot is gonna end up being 15 degrees like rapid Robert had guessed.
