looking down at the reluctor, make a new hole maybe 10 deg CCW from the orig hole. cap bulge to cap bulge is 45 deg so from your sharpie marks it might even take 15.
Thank god you replied!!! I've been wanting to hear which way to try a new locating hole, so my next question is how do I measure in degrees to get the spot at least some what close? How far apart is each tooth on the reluctor roughly? That would give me a good starting point on how far it needs to be. I'm going to the hardware store with my digital micrometer to measure out different sized drill bits to use on making a new hole and I bought 2 other reluctors to have as spares in case I botch one of them
