I'm thinking about just buying a cheap 12 volt coil from one of the part stores and throwing it on just to see if it is my crane cams coil that's causing this.
Is there any particular coil I'd need to get in order to test it out? Or would any 12 volt coil suffice in a quick little test like that.
Wouldn't run it very long, just long enough to fire it up and bring it up to 2500 rpm where the Miss firing fit comes on at.
I have done a warm compression test on this engine and every cylinder is dead on at 150 psi.
I can do another one if need be but it was only like 7-8k miles ago that I did a compression test on it.
Maybe even only 5k miles ago.