Well....Here's the block repair...Went very well. Wish it would not have let go, as this may get expensive depending on how the crank goes...Have to send that one out before we know which route that is going to go. After we figure out what we are going to do with the crank, then we order the rest of the parts, and then think about the oil pan...



Welded inside and out...Hired the Right guy!







Last edited by Dragula; 09/05/16 12:41 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk