Two more set backs this week.....My Milodon oil pan is back ordered, and I need to change valve springs.

I talked with Barton today about the cam break in with the tool steel lifters and the valve springs the heads came with and we have too much pressure at 230lbs closed. So it looks like I need to swap them out to a set of Comp springs to get to 150lbs or a little less.

The good news is the push rods showed up from BGR and they fit perfect and we checked piston clearances and everything else is a go!

'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk