I like keeping this thread alive so all my 605 Hemi related stuff is in one spot....So here is the finished hood, and the new side window stickers the car proudly displays....The 1250 is coming around with some tinkering and is actually a very drivable car considering the cam and lift and that big 1250 Holley setup by Thumper Carbs...

I am still trying to dial in the hood alignment. Its not the best I can get it yet, but the fenders and such were not mounted at the same time as the new hood, they were aligned to the old hood....PITA...Not to mention I pulled the diaper off after its test outing, and I burnt right thru it on one side.

KIMG0078_rsk.jpgKIMG0082_rsk.jpg
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk