Okay, did the front this weekend and ran into a few things.
Parts: 1996 Dakota drop spindles, 2" drop springs from Mid america customs, tie rod adjusting sleeves from a C body Moog part #ES440S 76 Newyorker adjusting sleeves.
Okay, I haven't read back through the posts so I'll cover what I ran into on my truck. 1)the brake caliper brackets had to be ground down about 1/8" to fit on the dakota spindles (I think this has been mentioned), the brake lines had to be bent to clear the nuts on the spindle, I know that has been mentioned. The Adjusting sleeves I ordered were shorter than the stock ones. I need about 1" longer than stock. I think Napa may have screwed up. Anybody have a measured length on the 76 new yorker sleeves? I'll try to get pics soon.
