Quote: I mocked up one side of the suspension today. I installed 2" drop springs 2" drop spindles and I am still 3.5" higher than the passenger side that I cut the springs on. I am thinking that chassis tech sent me the wrong springs. I measured from center line of the spindle to the fender lip and it wasat 13.5" with the springs cut, after the spindle and new spring swap I am setting at 17" I'm confused.
I saw your post on dodgetalk.com . Those springs look a little tall to me to be lowering springs.I cant remember exactly what the length of a stock spring is. I could have told you a couple hours ago but they are mounted in the truck now.Im thinking stock is around 11".I think your springs are the problem not the spindles.
