Quote: Spray brake clean or carb cleaner all around and see where the vacuum leaks are??? I use silicone on both sides of my intake gasket. I used "Gorilla Snot" gaskacinch.
where did you install the sensors for the O2??? I have a bung in each header collector, but only one sensor came in the guage kit.
Do you have another carb to try I think this one is wacked?? was it new or jerry rigged by someone?? The carb ran fine before I pulled it off for the cam swap. I only changed the 4 jets and Power valve.
You probably need a faster. ?????
Try holding you hand over cab to see if it idles better Okay, but it seems to idle fine. Its when I put a load on it that the guage goes LEAN.
Maybe ulta lean had been your problem all along. It looks that way. I'm going to UPsize the primaries to 88s and report back
