i lost that round,, the guy i raced had a .003 light and ran 9.062 on a 9.06 dial,, a .005 package.

60ft 1.211
330 3.595
660 5.617 121.25
1000 7.38
1320 8.890 147.99

it was 1600ft that run, i had too much jet in it.

the 2nd qualifing run i leaned it back out, but it got up and unloaded about 30ft out and shifted into 2nd and it has a small 2nd gear and it just killed it,, felt like it fell into a hole in the car.

60ft 1.252
330 3.671
660 5.70 120.85
1000 7.467
1320 8.976 148.48

i had 2750ft on that run,, close to same as us nationals

here was the best run with a motor i built in little joes car

60ft 1.204
330 3.517
660 5.488
1000 7.209
1320 8.683

a run jerry made

60ft 1.179
330 3.530
660 5.535 122.22
1000 7.285
1320 8.787 149.07

i know i would have run the back half faster than this run and having .03 on him at the 330 and 1.8th,, thats where i got that id run an 8.75,,i lifted some to try to pull him in closer to me right after the 1/8th, so i know the 1000ft is off a little,, but then i lifted completely out of it just about about 1100ft,, too much and he went past me by a foot or two,, but either way i was happy that i made a small change and it woke up alot, i need to test. i dont know if im going to maple grove but i made progress this past weekend.

jeff