I have Afco double adjustables on all four corners. Great shocks, looking to get the most out of them. I have the car in the sig obviously, 3000 lbs, ladder bars 30 inches long, leave off trans brake at 4500 Vs a 6400 stall. The weight dist is now 47.5 rear 52.5 front. I have started testing with the rears soft on extension, medium on compression and have progressed to about the middle of their adjustment for stiffness, seems to be about right as the 60 fts went from 1.28 down to 1.259 and got very consistent. Fronts are still dead soft on extension , fairly stiff on compression to help with the landing.
Where would you go from here? The car wheelstands and hits the 66 inch wheelie bars fairly hard. I have about four inches of travel up front.
My thoughts are to start stiffening the shock rebound a touch, then after finding a good point for that start shortening front travel, which is about four inch of rise. Any change to that plan?