The red wire is from the OE plug, it has an earth in Brown of the same dimensions.
This test was @ 22.0°C outside temperature, power being drawn after 15 mins was 45 amps as near as dammit.
When off fan spins easily by finger, no noise from bearings, thermo sensor on fan centre shows no difference to ambient temperature. The same on the heat sink where the fan connects.
Two fully charged 12v marine batteries in parallel, no appreciable drop in voltage, 13.3 standing overnight, 12.8 during test.
I plugged the OE connector in and lengthened the cables to reach the CB, run for a further 15 mins, no heating of cables.
I plan to continue looking for the correct terminals so I can wire in heavier gauge cable, in the meantime I hope 'feets can find something On the MB computer?
