Mancini Racing Stroker Kit (Common Eagle Kit) $1,750.00 Balanced
.Product Description Kit includes: Diamond dished lightweight forged pistons wit .990 pin and Diamond moly piston ring set. Eagle 4340 forged crank with 2.200" rod journal. Eagle ESP H-Beam rods. Clevite Tri metal rod and main bearing set.
440 Source $1897 Balanced In EVERY kit, we include everything you need, crank, rods, pistons, pins, locks, Clevite main bearings, Clevite rod bearings, Total Seal file fit moly rings, AND precision final balanced, all for just $1897!! We make sure that EVERY specific piston and EVERY specific rod used in our balance jobs are weighed to verify they are within our spec. We do not just use what's "written on the box" or any "estimated" weights for any part of the balancing operation. Other shops call this a "competition balance" and charge a few hundred bucks extra for it. We call it standard practice.
K1 Stroker Kit (muscle motors) $1999 Balanced 440/500: 4.15 stroke x 6.76 rod
This is the kit that stared it all. Forged dished pistons are required for pump gas compression. It is available in .030, .040 & .055 bores with quite a few different compression ratios available. This kit will require minor bore notching so that the rod bolts do not interfere with the block. You will also need to clearance the boss that the oil pick up tube screws into. Kit comes competition balanced with Plasma moly rings and chamfered bearings. A tried and true combination for the ages.
Only: $1999
Hughes Engines Balanced $1896.00
Crank, Rods, Pistons, Rings, Rod & Main Bearings W/ Street Balance
Build your 440 into a 493 cubic inch pavement pounder with this Hughes Engines Street balanced stroker kit. This kit features: (Includes bearings, rings and street balance) Precision Engine brand 4340 Nitride Forged Steel 6 bolt Crankshaft - 4.150" Stroke Precision Engine brand"H" Beam Forged Steel connecting rods approx 790 grams - 6.760" Length, 7/16 bolts Keith Black Premium 2618 aluminum alloy Forged -23.7cc dish pistons made from aerospace quality aluminum billet. Approx 824 grams / piston & pin - 4.350" Bore (We also offer flat top pistons for higher compression ratios.) Total Seal brand 1/16-1/16-3/16 Plasma Moly ring set Clevite "V" series 1/2 groove Main Bearings Clevite "V" series Rod Bearings Internal Street Balancing Street Balancing: This type of balance can also be called "Box" or "Crate Engine" balancing. The weights used are those printed on the box by the manufacturer of each part. With todays C.N.C. parts, they are closer than some race parts were 10 years ago and closer than most of todays stock parts. The crankshaft is spun up and corrected to within 1/4" oz. (the same tolerance as a Race balance). For engines that spend the majority of their time below 6,000RPM this type of balance will satisfy the need of a cost conscious customer. Most of your mass market stroker kits are balanced this way.
My Carillo "RBRE" Carillo Rods Carillo Crank diamond pistons All bearings COMPLETE Balanced $3185
