Originally Posted By MattW
OK
Fab 9 with back brace all the way till the ends.
Brakes are no problem cuz I'll go with disk. Just need to fit a 15 inch wheel.

So here's a stupid question and I think I know the answer. NO
Can you put a 40 spline axle in a 35 spline centre section. I know the spool has to be changed. Would a 35 spline centre section accept 40 spline shafts?
Reason I asked and it contradicts what I posted before is that I'll go with the 35 spline and Wavelok now and upgrade to 40 and spool then.

Thanks for all the input guys!
This has to do with the housing bore of the case. As long as you have the right housing bore, you can put a 35 or 40 spline spool in that case.