Originally Posted By MattW
OK
Fab 9 with back brace all the way till the ends.
Brakes are no problem cuz I'll go with disk. Just need to fit a 15 inch wheel.

So here's a stupid question and I think I know the answer. NO
Can you put a 40 spline axle in a 35 spline centre section. I know the spool has to be changed. Would a 35 spline centre section accept 40 spline shafts?
Reason I asked and it contradicts what I posted before is that I'll go with the 35 spline and Wavelok now and upgrade to 40 and spool then.

Thanks for all the input guys!
I don't think the 35-spline and the 40 spline uses the same housing bore.. I wouldn't spend the money twice do it right the first time

In the 8s N/A.with Brett miller W8's
5.07 at 133 at 2700lb