Quote:

1. Set a performance goal
2. Find a shop that does precision machine work
3. Have any kits that you do buy checked
4. Work with a pro when selecting your cam. Someone that is familiar with mopars.
5. Keep compression 9.5-10 with cast iron 10-10.5 aluminum heads
6. Keep quench around .040



I want to run mid to low 12's. I will likely have to switch up gear ratio and tire size though??
I have a good machine shop to double check whatever I end up getting, along with doing my machine work.

The cam is another thing that I need to know about.

Thanks

I went to performance only website and there is pretty much nothing on there. I need to be able to read all the info on what all is in the kits.