Metal was then ground with mud hog and 80 grit. Edges were hit with rolls scotchbrite one wire wheel. The entire surface was then DA'd again with 80 grit before being cleaned again with wax and grease remover.

Last edited by 70B5Cuda; 12/17/17 12:33 PM.

1970 Barracuda B5 6.1 Hemi/6 speed
1969 Charger survivor in R6 383/727-wrecked 12/24/18
1968 Charger in original burgundy paint "Ribeye"
1968 Charger w/ 6.1L, TR-6060, 9"
1968 Charger...clean slate in epoxy
1968 Roadrunner w/ 6.1L/6 speed
2010 B5 Challenger SRT 6.1L/6 speed
2011 Dodge Ram w/ 6.7L