Care to critique my set up? 360 10.5:1 compression, eddy 63cc chamber heads, MP.557 solid cam. Holley 750 DP. Edelbrock nitrous kit with 100 shot jets. -8 feeding line with a holley blue pump feeding the engine, -6 and another holley blue pump feeding the nitrous (from the same fuel cell). Rings are gapped I believe .025 (speedpro recommended for nitrous). My plugs are NGK that are gapped at .040. I haven't run it yet so I figured I post my combo and let the pros tell me if I made any mistakes. I'm also using an MSD digital 6 with the nitrous retard removing 5 degrees of timing once the WOT switch is made.