Quote: ... Most people who dont like it just did not run it in the right combo. Ron
EXACTLY
what's the right way??? I'll tell you, 3000 stall, nice headers, high compression, decent heads and 3.91's or better. So he has a stcok stall and 3.55's is it going to run well?
yup
I think you need to get off the
Tell you what you put together a stockish 440 w/ mani's, stock stall, 484 cam and 3.55's I'll do the same with and use a el-cheapo special from Summit or Jegs and spot you a light or two.
why? you just a sucker for punishment? or is that just howz yah like it.
Nope just been there w/ the 509 and 484 in stockish 440's. a stock magnum cam works better.
really? a stock magnum cam in my 74 400 SSP went 14.80s with 3.55s and the stock convertor. with the 509 it went 14.00s with the same 3.55s and the stock convertor. looks to me your logic doesn't apply.
Haven't you been paying attention? He doesn't USE logic.
In his eyes, this cam is junk because HE has never had any luck with it. If he were utilizing any logic, he would have read of the SEVERAL others who use this cam with success and realized that it's a decent cam. THEN and only then would he start to wonder why it seems that only his set-ups were dogs.
what's the right way??? I'll tell you, 3000 stall, nice headers, high compression, decent heads and 3.91's or better. So he has a stcok stall and 3.55's is it going to run well? 
Nope just been there w/ the 509 and 484 in stockish 440's. a stock magnum cam works better. 
