Quote: My GTX has the 284/484 Mopar cam. During recent discussions on the board I was told by many that they really disliked this cam (their opinion was the stock 440 cam was just as good under certain circumstances).
Anyway, I currently have a low stall converter (~2100 rpms) and a 3.55 suregrip. If I swap in a Dynamic or PTC 3000 rpm converter would that wake the cam up or should I change the converter and cam together? If so, what cam?
This is a 100% street car.
Easier to swap out the cam than pull the trans. A few cams too think about: LUN-337A1LUN 220/220-485/485 Idle-5500, XE268 224/230-477/480 1600-5800, XE262 218/224-462/470 1300-5600 I used the Summit 488 cam 224/234-465/488 ran 12.90's in a "junk yard" 440 I also ran it in a bone stock 67 GTX w/ 3.55's logs and on radails to 13.80.
