Hey guys been kinda busy so i havent been able to get around to posting pictures, finals in school and all, but here is some updates...
First i finished up patching the trunk extensions, butt welded of course...
Then i moved into the rear of the car, where all of the focus is now. I needed to remove this gutter and quarter end as i have replacements from the parts car, and the quarter end on the passenger side as well.
Then in order to do the trunk floor replacement the tail panel needs to come off and in addition is need some metal work, well a lot of it...
Then i cut the quarter down a little bit and marked up the super bee to get a line to cut it out by...
Still have a final tomorrow so i better get going!
