Did some more work today, mostly fabrication and fixing of some of the more seriously rusted out areas.
Here is the two extension pieces that go from the trunk extensions to the frame crossmember. As you can see the one is okay but the other is junk, sadly this is the best one from all three cars, so it had to be used.
I cut the upper lip and then the piece in half for the most part...
Here is what will be the new side...
Cut out the relief cut and the angled area at top...
Here are the two tabs i made...
Welded up the made up piece...
The one new tab welded on...
The finished product...
Also did the tail panel extension, top piece welded on...
