Well guys havent done too much exciting just bondo work. The lower drivers quarter is extremely wavy even after hammers and dollys so it does need quite a bit of attention with bondo. I am masking it off by body lines to try and make them as crisp as possible. Here is the first section on and then the second taped off...



Then to get the kink in the side of the quarter better it was masked off again, yes there is a lot there but better more than not enough. Just need to start with everything high to help build the lines up then can slowly knock them down...



Then we have a cow as a hood. The thing has multiple dings and a lot of pitting and still more needs added...