I got the servos repopulated, the intermediate shaft support installed, and seated the overdrive yesterday. It was kind of a bear to seat. I was gentle with it because of the governor tubes, but I had to wiggle and fight it on a bit. Is this normal?

It seated so oddly the first time that I pulled it back off, and boy did it not want to come back off. The second time it seated the same way, so I guess it's just how this one wants to go together. I lubed the intermediate support where it contacts the bushings in the OD, so I know it wasn't because of lack of lubrication.

I used the Sonnax intermediate support, and NOT the oversized one.