OK, now bear with me here. The red 12 gauge wire from the starter relay (red from the bulkhead) is no longer attached to the Painless fuse block, it's now routed to the ammeter stud, along with the parallel wire from the starter relay? If you remember the instructions and the diagram of the Painless fuse block. The 12 gauge wire from the batt feed that attaches to the batt feed terminal (#17 on the instructions) now is routed to the ammeter? I just want to be sure I understand all this before I begin changing wires from my current setup. If this is correct, what wire does attach to that terminal?

Sorry, don't mean to be a big pain, and I really do appreciate the help. I just want to be sure I understand.