Quote:
Right now, I cannot locate any wire that powers the gauges.
the gauges would be switched on (hence the term switched 12V) from the ign sw and the ign sw is hot all the time so it would be fed from a T before the fuse block. Sounds like Painless is suggesting that you convert to a voltmeter rather than an OE or aftermarket ammeter. EDIT just saw your post. T into the ign switch (ign1) terminal. This is switched 12V and when you turn the key to "on" the gauges will be powered
Last edited by RapidRobert; 02/23/10 01:14 AM.
