OK, let me try to explain the situation. When I wired in the new fuse block, according to the instructions, the main feed wire, instead of routing it to the ammeter, it was routed to the fuse block. So, you are saying that I need to splice in the ammeter between the bulkhead and the fuse block? If so, that's not really a problem. However, what about the wiring upgrade where I run the 2 wires through the firewall? Can that still be done, and if so, how?

Thanks for your help, btw!!!

Oh yes, the Painless items are quality material, but there are so many different companies out there now that competition is tight! Even Summit is offering a universal harness now.