If you put pre load into the right bar the front bolt
wont come out... but if you know the amount of turn
(as in a 1/2 turn) then you turn out the pre-load
then it should come out... I've fixed multiple cars
that they were tearing off the axle housing brackets





MR_P_BODY-




Yeah... the upper brackets are what I usually need
to fix... also the lower right bracket where the diagonal
link mounts tend to break/crack but mainly on cars
that are street driven due to side loading the lower
part with the diagonal link... I put a gusset on that
section right down to the bolt area to stiffen the
side load....
you can sorta see the gusset in this pic but this is
a 9" but they all do the same thing