Single bar plate ???

Monte, tested twice now and the results ? Single bar plate won't pick up above a .116 jet. I'm using a trash can, -6 feed line. Is the bottle valve the restriction ? I'm using OLD nos 10 lb bottles with the "straight" hi flow valves, not the angled ones. Car went 5.30 but won't go more than 132.88. So far best 60 is only 1.28 creeping up on the progressive and almost no launch curve with the "new" MT 275 , not the pro

Tuneup is .082 fuel, .116 nitrous(tried .126 no better, lowered fuel psi same A/F )
Timing going down the track 22, b1 mc with softened chambers. A/F is usually 12.8 to 13.2
Straps are showing no heat, but adding .5 of timing showed no gain in mph so I took it back out.

I know you will have more questions, but this is all I can think of. I'm running ultra street so I Ned to go at least 140 to 145 to be competitive.


....BAD A$$ STREET CAR.....