Capital Bearing here in Austin is an aeroquip distributor and can do the nice professional high pressure crimp hoses. Braided even, just might have to wait on the fittings a day or two to come in if you want the real pretty stuff. I have copies of the aeroquip catalogs if you need part numbers for the braided line and crimp connectors for the braided line. Up in big D they may have that kind of stuff in stock. If you want to just do the industrial style with a swivel NPT fitting on at least one end they can usually do that while you wait. Stuff I have done for work was not too expensive, was rated for earth movers and could handle 5000 psi. I would recommend you get the remote filter stuff from Canton. You can do standard spin on stuff, or the fancier cannister style. They are the people who do the "accusump" systems as well if you are interested in that. For the rest of y'all Canton's spin on block adapter is one of the only that I have seen that isn't scary and has proper passages.
