Quote: Hey John, you are right the retainer looks OK but what about the PR adjusting screw itself? It looks to be leaning a bit to the left. I'm just thinking that the "nut" for the adjuster screw may not be installed the right way. It is rectangular and if it were installed wrong, it could push it sideways slightly.
John, you were right. I hit the breather with air and all that crusty stuff blew away. RIP transmission dwelling critter.
The PR adjusting screw IS cocked a little. I don't know what to do here. The TransGo kit instructions say to adjust the bolt until the plate just touches the bracket. The bracket has an indentation like a triangular kink pressed into it on the left side that keeps the plate from laying flat against it. How do I set the plate if it won't lay flat?
