Quote:

Can you run a jumper from the battery plus to the coil + and at the same time, jump across the ballast resistor from one end to the other with a jumper? Then try starting it.





Ok jumped across ballast resistor ( elminating it, assuming that is what you were asking me to do), and at the same time used a jumper wire from the battery plus to the positive side of the coil.

Result was start issue was the same, started in RUN and not in START,
but when I went to turn the car off and took the key out the car kept running.

I took the jumper of the positive battery terminal and the car stopped.
Does this mean anything?