Quote:

Quote:

Thoughts?

it "runs" so the pickup/coil/ecu (hard components) are good and the ECU is grounded. Check the wiring schematics how it's wired as only the coil positive primary terminal and the "point" of the ECU pentastar connector (4 pin) need fire in start (ign2) as the pickup triggers the ECU which opens the coil pri makeing the secondary fire. Either one of those hard components is not getting fire in "start" or in "start" it is mis wired and something is getting grounded that should not be grounding.



I replaced the ECU and the coil , and checked I was getting a good ground at the ECU when I changed it.

But I understand what you are saying, something is not getting fire in the start. I don't think it's miswired because it was working fine before.