correct on the bearing orientation. opened up all 1/2" and 5/16" oil gallery. plugged dr oil gallery on #1 main. this was done before the block went to the shop and it did get a cleaning there. their is a plug in the large oil gallery under the rear cap. what is the proper orientation for that plug? how is it possible to have 75psi oil and not get enough oil to bearings?
Dave... didnt you say you had 100 psi in your
early post... anything over 70 is just getting
dumped back.. it doesnt go through the block..
and your pic of the relief valve.. I'd bet that
happened after it came apart.. a piece hung that
valve open.. have you looked at that chunk yet
