Removed the heads today. Not sure I found the issue, but I did find a issue. Both intake and exhaust valve touching the piston on #8 only. Now I did check VP clearance but on 1 and 2 cylinder only(.130) on both. I did check deck height on all cylinders and I had .005 in the hole on all. The valves have not been checked but do not look bent.

IMG_20160305_125404.jpgIMG_20160305_125417.jpg
Last edited by mopar dave; 03/05/16 04:34 PM.
http://www.youtube.com/watch?v=aIxaesJ190U

http://youtu.be/lCZAaN7fFLg