I replaced the blue wire that was burned and I made some voltage checks:
Key @ RUN:
Bat: 12.8v
Coil +: 11.9v
ECU: both terminals 12.0v
Dist Connector: 1.85v
Cranking: No visial spark from coil wire
NO START. It did not even try to fire. I pulled my dist cap and all of the tips looked clean.
I am plannin on putting on my old Orange MP ECU and try to restart, but not until tomorrow night.
Any other suggestions are appreciated.
Thanks
Last edited by YO7_A66; 06/20/10 08:40 PM.