trans cooler brackets and fan shroud extension are figured out and ready for paint 👍 . Trans cooler brackets keep the lines away from the exhaust and engine pulleys, and the shroud is a 2-part unit that extends the tunnel to the now-further-back fan. I still need to trim the back edge of the tunnel extension to allow about 1/4 of the fan to be 'exposed' to allow the fan to 'expel' the air and not force all of it onto the front of the engine and accessories (alternator, pumps, etc) - should work great.
Also relocated the radiator outlet port down a bit - should allow for cooler coolant back into the engine -