Originally Posted By Andrewh
https://www.amazon.com/50-Female-Terminals-2084421-2962447/dp/B0040CU11M

https://www.amazon.com/Packard-Male-Gaug...9BYT9ED6A1SXCMY

cheaper than napa if you are ordering on line.

or del city or
probably a few other places.

I only use napa when I need 1 or 2 and have to have it today.

not sure I would order a new bulkhead connector.
you can patch up or by pass the one you have.

taking it apart and redoing all the connectors is good enough.


Ok cool, I will try to get by without having to get the bulkhead connector first.

Also, a question in response to a recent suggestion from mattax,

"Based on the info so far, I'd start with checking the alternator's battery stud for a short to ground and work back from there."

how would I go about doing this? Would all of the wires have to be hooked up first, or just take off the alternator and have it bench tested?

Sorry for so many questions, this is a weak area for me and I am learning a lot, thanks!

Last edited by eightlitermopar; 09/04/17 11:09 PM.
Mopar or no car