Quote: Yep, but get your heims first before you drill it, I'm sure you will need the high angular heims
Now that we solved the tie rod angle problem.......
How did you cut and thread your tie rods? Since the main rod is alot bigger than the threaded part. I have the .500 UNF die and tap. Thats the biggest I have.
I was thinking maybe make them whatever thread is close to the original diameter?
I dont think you will need to shorten the shaft I think you will see that when you get done you will need a short coupler with a insert in each end(threaded inserts). I cant remember what the thread is on the rack but just use that and put one of the inserts in your coupler for that thread then the outer for the high angular heim
