Quote: I will probably need a 0 offset and 4.5 backspacing on an 8" wide wheel to fit in the wheel wells without rubbing. Tim
Just make sure what ever you use will have caliper clearance of course..
I built my brakes to suit my wheels. (I found the exact wheels I wanted first, so built to fit them, and hence needed a certain rotor height)
Feets did it the other way around, he built the brakes and then made me have wheels built special to be able to fit.
And funny thing is, we both had the same rotors and calipers in the end. My wheels use a flat spoke made for large brakes basically, he went with ones that curved back, so the wheel needed a custom mounting pad height to be able to get the spokes to clear the caliper.
With your caliper being a tad further out, you'll just have to make sure you get a wheel to clear obviously. (Let alone what back spacing you need to fit that car, the actual center of the wheel itself will have to fit the brake assembly...)
