dales cuda shop dodge A12 hoodpin set. got a half set from dale, and the pins are mounted into the spots where the hood adjustable bumpers went. put some clay on top of the bumpers, and pushed the hood tight against the bumpers. the clay got squished out except for the spot in the middle where the hole in the bumper was. used that for a guide to drill through the hood. used a 1/2" bit to open the hole, and mounted the pins.






painted cowl and inside of cowl/vent box, hood hinges, etc. *nothing wrong with the seat, it's the dobies seat cover so they dont get the seat dirty



finished sanding hood, used a base coat and then some high fill primer, sanding then will do top coat.






coming along nicely i guess. will be done in another day. (splitting work between the truck and redoing a small fishing boat i have, to make it more "flats friendly" to suit my own needs. )