Yes...It kind of makes you about half dizzy when you do it...

All of the interior panels have it...

Kickpanels...dash..door and 1/4 panel and the rear wall separating the trunk...

All of the interior window trim will remain as chrome...some is a little pitted but it looks period correct...

Dash...steering column and all of the upper door steel panels are an aqua color and have been aged...

All of the floors and the interior of the roof will be white...

Roll cage will be black...

Vintage 2 5/8" Stewart Warner 150 lb oil pressure and temp gauges are all that will be installed...Maybe a volt gauge if I can find one to match...

I also have a vintage 9000 rpm Stewart Warner Cable drive tach for on the dash...

I have a set of SS seat brackets that I will duplicate for the outers and then have to fabricate new inners due to the higher floor height...

Recently picked up a correct 65 Hurst shifter handle...installed the white T handle and the reverse lockout on it this morning...

Steering wheel was removed from a late 60's old drag car and is a teal glitter wheel...

Installed the Moon gas pedal in the finished front floors...