I got the new alternator belt installed after the first one I bought was too short...

Finished up 90% of the wiring...

The other 10% is the line lock and the field wire for the alternator which I can do later...

Headlights...tail lights...dome lights and gauge light wiring all works now...

Minus the drivers side high beam which took it upon itself to work for 5 minutes and then blow out...

Ignition is finished...and the starter works from the key as it should...

Got the aluminum in the dash installed and the gauges hooked up...

Put the balance of the fuel lines on from the gas tank to the fuel pump...

Fired right up first try and had it running for about 15 minutes...

Okay...2nd try as the 50CC pump gaskets in the 660's were dry and hard...

Sounds just like I hoped it would...

Leaked a very small amount of oil out of the valve covers like I figured it would...

Tried to take a video but only got my finger covering the camera...

Kind of sums up my whole week...

Need to chase a few more Demons out of it and then let it run a little longer...

I must have been busy since I didn't take any new pictures...