Originally Posted by JERICOGTX
Originally Posted by GomangoCuda
Originally Posted by n20mstr
Originally Posted by BiomedTechGuy
I'm not familiar with the motor mounts to identify them by sight. I have a QA1 K-member installed, and I had spent extra last year on a pair of Mitey Mounts that have metal "T" shaped supports in the rubber to prevent breakage or excessive travel.
Are you saying this block has "Hemi motor mount" pads and those are different than RB/440 mounts?


That Block in the pics above has HEMI mounts. THe mount is the flat pad with three holes on each side of the block


Hmm, look at the top row of head bolt holes. Isn't this in fact a Hemi block? That would sure explain the hemi mounts.


Wedge head bolt pattern.

Pic taken from BMP website. Notice the difference in how far the top head bolt hole is from the bore in both blocks. Also note the larger untapped upper head stud clearance holes in the hemi block. Now look at the pic from the OP.
Pretty sure that's a hemi block.

Screenshot_20211215_145940.jpg
Last edited by GomangoCuda; 12/15/21 04:26 PM.
In theory, there is no difference between theory and practice. In practice, there is.