866hp at 6,800 and 724tq at 5,200
700tq from 5,000 to 6,500
1.7 hp per cubic inch

I was hoping for a little more but knew 850 was more realistic Small cid 508”, lower compression 12.4 and stage 1 ported heads so there more power to be had but I think this will be perfect for what I’m doing. Definitely not working the components any where near their limits.

1st two pictures were the final pull using my mechanical pump and the 2nd was the final pull using the Dyno fuel syste, it was still Miami good power at 700 but was lower, it was only at 5.7psi fuel pressure and mechanical was lower to 6.5.

I’ll post picture of the air fuel oil pressure and fuel pressure later, I left without those so getting them sent.